Warmth and Anergy Request - IBC Chur

Which connection would you like to choose?

Installer

This field is mandatory

Clerk

This field is mandatory

Phone Number

Please enter a valid phone number

Please enter a valid mail address

Client

First Name

This field is mandatory

Last Name

This field is mandatory

Street, No

This field is mandatory

Post code/city

This field is mandatory

Owner

First Name

This field is mandatory

Last Name

This field is mandatory

Street, No

This field is mandatory

Post code/city

This field is mandatory

Object

Surname

This field is mandatory

Street, No

This field is mandatory

Post code/city

This field is mandatory

Installation

This field is mandatory

Building type

This field is mandatory

Connection system

Make

This field is mandatory

Type

This field is mandatory

Heat exchanger 1

This field is mandatory

Volume flow (m³/h)

This field is mandatory

Temperature VL Primary (°C)

This field is mandatory

Temperature RL Primary (°C)

This field is mandatory

Total performance (kW)

This field is mandatory

Heat exchanger 2

This field is mandatory

Volume flow (m³/h)

This field is mandatory

Temperature VL Primary (°C)

This field is mandatory

Temperature RL Primary (°C)

This field is mandatory

Total performance (kW)

This field is mandatory

Total m³/h

This field is mandatory

Total kW

This field is mandatory

Regulation

The primary side control is carried out via the IBC controller, which is located in a separate SGK IBC. The SGK IBC including the controller, communication module and associated electrical diagram is created by the IBC. The wiring of the primary side field devices (combination valve, sensor, heat meter), as well as the interface wiring between the primary and secondary controllers, must be carried out by the customer and at their expense. The secondary side control is the customer's responsibility and must be accommodated in a separate SGK. The corresponding IBC controller <-> customer controller interfaces must be provided according to the connection type.

IBC connection type (A,B,C,D,…)

This field is mandatory

Combi valve WT 1

This field is mandatory

Make

This field is mandatory

Type

This field is mandatory

Drive (VDC)

This field is mandatory

Signal

2-10V

4-20 mA

This field is mandatory

Combi valve WT 2

This field is mandatory

Make

This field is mandatory

Type

This field is mandatory

Drive (VDC)

This field is mandatory

Signal

2-10V

4-20 mA

This field is mandatory

Primary side circulation pump with frequency converter (if available)

This field is mandatory

Make

This field is mandatory

Type

This field is mandatory

Drive (V kW)

This field is mandatory

Signal

2-10V

4-20 mA

This field is mandatory

For primary/secondary controller communication, the following hardware interfaces must be provided on the secondary controller:

Data points

Heating requirement

This field is mandatory

Heating setpoint (2…10V, 4-20mA)

This field is mandatory

Collective fault report

This field is mandatory

Hot water demand

This field is mandatory

Hot water setpoint (2…10V, 4-20mA)

This field is mandatory

Forced charging of hot water

This field is mandatory

All data sheets including electrical connection diagrams must be requested from the supplier by the planner and submitted with the installation notification of the IBC.

Start of installation work

This field is mandatory

Estimated completion

This field is mandatory

Delivery primary controller

This field is mandatory

(at the earliest 3 months after delivery of the installation notice)

Meter installation

This field is mandatory

(at the earliest 3 months after delivery of the installation notice)

Commissioning

This field is mandatory

(at the earliest 2 weeks after delivery of the completion notice)

Attachment

Scheme

This field is mandatory

Floor plans

Device documentation

Data sheets

This field is mandatory

Drag & drop to upload document Upload your papers and documents here Upload Document

I hereby declare that all the information I have provided is complete and correct.

This field is mandatory

Installer

This field is mandatory

Clerk

This field is mandatory

Phone Number

Please enter a valid phone number

Please enter a valid mail address

Client

First Name

This field is mandatory

Last Name

This field is mandatory

Street, No

This field is mandatory

Post code/city

This field is mandatory

Owner

First Name

This field is mandatory

Last Name

This field is mandatory

Street, No

This field is mandatory

Post code/city

This field is mandatory

Object

Surname

This field is mandatory

Street, No

This field is mandatory

Post code/city

This field is mandatory

Installation

This field is mandatory

Building type

This field is mandatory

Connection system

Make

This field is mandatory

Type

This field is mandatory

Heat exchanger 1

This field is mandatory

Volume flow (m³/h)

This field is mandatory

Temperature VL Primary (°C)

This field is mandatory

Temperature RL Primary (°C)

This field is mandatory

Total performance (kW)

This field is mandatory

Heat exchanger 2

This field is mandatory

Volume flow (m³/h)

This field is mandatory

Temperature VL Primary (°C)

This field is mandatory

Temperature RL Primary (°C)

This field is mandatory

Total performance (kW)

This field is mandatory

Total m³/h

This field is mandatory

Total kW

This field is mandatory

Regulation

The primary side control is carried out by the IBC controller, which is located in a separate SGK IBC. The SGK IBC including the controller, communication module and associated electrical diagram is created by the IBC. The assembly and wiring of the associated fittings and sensors is carried out by the IBC electrician on site. The secondary side control is the customer's responsibility and must be housed in a separate SGK. The corresponding IBC controller <-> customer controller interfaces must be provided according to the connection type.

IBC Connection Type (H,I,...)

This field is mandatory

Control valve WT 1

This field is mandatory

Make

This field is mandatory

Type

This field is mandatory

Drive (VDC)

This field is mandatory

Signal

0-10V

4-20 mA

This field is mandatory

Mixing valve WT 1

This field is mandatory

Make

This field is mandatory

Type

This field is mandatory

Drive (VDC)

This field is mandatory

Signal

0-10V

4-20 mA

This field is mandatory

Primary side circulation pump with frequency converter (if available) WT 1

This field is mandatory

Make

This field is mandatory

Type

This field is mandatory

Drive (V kW)

This field is mandatory

Signal

0-10V

4-20 mA

This field is mandatory

Control valve WT 2

This field is mandatory

Make

This field is mandatory

Type

This field is mandatory

Drive (VDC)

This field is mandatory

Signal

0-10V

4-20 mA

This field is mandatory

Mixing valve WT 2

This field is mandatory

Make

This field is mandatory

Type

This field is mandatory

Drive (VDC)

This field is mandatory

Signal

0-10V

4-20 mA

This field is mandatory

Primary side circulation pump with frequency converter (if available) WT 2

This field is mandatory

Make

This field is mandatory

Type

This field is mandatory

Drive (V kW)

This field is mandatory

Signal

0-10V

4-20 mA

This field is mandatory

For primary/secondary controller communication, the following hardware interfaces must be provided on the secondary controller:

Data points

- Heating requirement

This field is mandatory

- Cooling requirement

This field is mandatory

- Heating collective fault message

This field is mandatory

- Collective fault message cooling

This field is mandatory

All data sheets including electrical connection diagrams must be requested from the supplier by the planner and submitted with the installation notification of the IBC.

Start of installation work

This field is mandatory

Estimated completion

This field is mandatory

Delivery primary controller

This field is mandatory

(at the earliest 3 months after delivery of the installation notice)

Meter installation

This field is mandatory

(at the earliest 3 months after delivery of the installation notice)

Commissioning

This field is mandatory

(at the earliest 2 weeks after delivery of the completion notice)

Attachment

Scheme

This field is mandatory

Floor plans

Device documentation

Data sheets

This field is mandatory

Drag & drop to upload document Upload your papers and documents here Upload Document

I hereby declare that all the information I have provided is complete and correct.

This field is mandatory

Installation inquiry heat or anergy

Which connection would you like to choose?

Installer

Client

Owner

Object

Installation

Building type

Connection system

Heat exchanger 1

Heat exchanger 2

Regulation

Combi valve WT 1

Combi valve WT 2

Primary side circulation pump with frequency converter (if available)

Data points

Attachment

Installer

Client

Owner

Object

Installation

Building type

Connection system

Heat exchanger 1

Heat exchanger 2

Regulation

Control valve WT 1

Mixing valve WT 1

Primary side circulation pump with frequency converter (if available) WT 1

Control valve WT 2

Mixing valve WT 2

Primary side circulation pump with frequency converter (if available) WT 2

Data points

Attachment

Quick Links